Your Advantages
- For 3/8" or 1/2" (10 or 12 mm) Glass
- Use Monolithic Tempered Glass
- Works with Both 2-3/4" and 2-9/16" (70 and 65 mm) Pivot Setback Door Patch Fittings
The CRL Sidelite Mounted Transom Patch is used to support a transom from a sidelite glass panel. It comes with a INT300 Insert for mounting a door with the CRL PH20A or PH21A Top Door Patch Fitting. The Insert can also be moved on the non-hinged side, allowing for a double swing door. A INT306 Transom Patch Door Stop Insert can be used to create a one way door. Also, a INT305 Transom Patch Keeper Insert can be installed for use with an AMR205 Lock when used for top of the door installation.
If the weight of the transom exceeds 100 lbs. (45.4 kg) the transom must be supported from the ceiling. This is to prevent the Patches from slipping from too much weight. Use either Cat. No. B5BC Smoke Baffle Channel or PH94 Patch Fittings. Please contact our Technical Sales Department for assistance.
GLASS FABRICATION REQUIRED:
Three 3/4" (19 mm) Diameter
Holes and Corner Notch
If the weight of the transom exceeds 100 lbs. (45.4 kg) the transom must be supported from the ceiling. This is to prevent the Patches from slipping from too much weight. Use either Cat. No. B5BC Smoke Baffle Channel or PH94 Patch Fittings. Please contact our Technical Sales Department for assistance.
GLASS FABRICATION REQUIRED:
Three 3/4" (19 mm) Diameter
Holes and Corner Notch
| Glass Thickness | 10 - 12 mm |
| Mounting | 180° Sidelight Mounted Transom |
No downloads and documents available.
NOTE: These fittings are not for use with laminated glass.
Three 3/4" (19 mm) Diameter
Holes and Corner Notch
COMES WITH:
Template and Instructions
Holes and Corner Notch
COMES WITH:
Template and Instructions
CRL Sidelite Mounted Transom Patch with 1NT300 Insert
Cat. No.
configSku-61265
Shipping Information:
- Can Ship UPS
Alternative products
